R&SZVRE|羅德與施瓦茨ZVRE|Rohde&SchwarzZVRE|網絡分析儀
咨詢熱線：137 2887 4587 鄧生
Rohde&Schwarz ZVRE 4G網絡分析儀|羅德與施瓦茨 9KHz至4GHz

品牌：羅德與施瓦茨 Rohde&Schwarz

The family comprises the five Vector Network Analyzers ZVRL, ZVRE and ZVR as well as ZVCE and ZVC which extend the frequency range to 8 GHz. All models are compact instruments with integrated generator, test set and receiver, each tailored to a different field of application. All analyzers can be subsequently upgraded to the higher-class models.


ZVRE and ZVCE : the economy models

The test set of these models comprises two SWR bridges (ZVRE) or directional couplers (ZVCE), an RF switch, two measurement channels and one reference channel. They measure the magnitude and phase of all four S-parameters of a DUT, allow a full two-port calibration (TOSM) and have an exceptionally high accuracy and wide dynamic range.



ZVRE, ZVCE (bidirectional, 3 channels)

ZVR and ZVC : the universal models

ZVR and ZVC comprise a test set with two SWR bridges (ZVR) or directional couplers (ZVC), an RF switch, two measurement channels and - unlike ZVRE and ZVCE - two reference channels. With this configuration a variety of novel calibration procedures, eg TNA, can be performed, which considerably improve the accuracy particularly in non-coaxial applications. ZVR and ZVC are the allrounders of the family and suitable for applications in R&D and production no matter how sophisticated.



ZVR, ZVC (bidirectional, 4 channels)

Test sets

The network analyzers can be provided with different test set options so that an optimally configured test setup is available to suit the applications.

For the 4 GHz analyzers "active" or "passive" test sets with a characteristic impedance of 50 W or 75 W are available. A 50 W passive test set is standard equipment. With active test sets, the DUT can be biased directly via the inner conductor of the test port. The 8 GHz models ZVCE and ZVC are always equipped with 50 W active test sets. Depending on the model, the test sets comprise one or two power splitters, an electronic switch and one or two SWR bridges or directional couplers. Additional step attenuators (0 dB to 70 dB, components marked red in the drawings below) can be inserted into the generator paths and the two measurement channels to extend the power range of the receivers to +27 dBm and to lower minimum output power to -95 dBm. When the test sets are fitted with attenuators and the External Measurements option (components marked green in the drawings below), generator and receiver can be alternatively switched to three ports on the front panel (OUTPUT a1, INPUT b1, INPUT b2). This increases output power, sensitivity and dynamic range, and measurements down to 10 Hz can be performed with the 4 GHz models. In addition, the flexibility on external test sets, e.g. using an external pre-amplifier, is enhanced. The Reference Channel Ports (components marked blue in the drawings below) allow to feed the ** for the reference channel a1 from outside. This feature facilitates e.g. phase measurements on frequency converting devices. The test ports are fitted with female N connectors.



Test Set ZVRE and ZVCE



Test Set ZVR and ZVC







Features



?Excellent dynamic range
>130 dB (IF bandwidth 10 Hz)

?Low inherent noise
<-130 dBm (measurement bandwidth 3 kHz)

?Broad frequency range for universal use
10 Hz to 4 GHz (ZVRE, ZVR)
20 kHz to 8 GHz (ZVCE, ZVC)

?High measurement speed
<125 μs/point (normalized)
<240 μs/point (fully calibrated)

?Fast data transfer via IEC/IEEE bus
Transfer time >25 sweeps/s (200 points)

?Manual calibration techniques
TOM, TRM, TRL, TNA, TOM-X, TOSM

?Automatic calibration AutoKal
?Compatibility with PC, CAE
Internal PC with Windows NT operating system suitable for PC applications


Speed >>25 sweeps/s

The extremely low-noise and fast synthesizer in conjunction with an exceptionally large measurement bandwidth of up t o 26 kHz al l ows real - time result display. The ZVx measures not in two subsequent sweeps but at every frequency point in forward and backward direction and thus all four S-parameters - including system error correction. This ensures real-time display of fully corrected data even during alignments with reduced sweep speeds. The dynamic range of ZVx is more than 95 dB even at a high measurement rate of 25 sweeps/s and 10 kHz measurement bandwidth.

Dynamic range >130 dB

The high stopband and low passband attenuation of modern RF components place new demands on network analyzers. Thanks to fundamental mixing, the useful dynamic range of Rohde & Schwarz network analyzers is more than 25 dB better than with conventional sampling techniques. Because of the low-noise front end, Rohde & Schwarz network analyzers attain a dynamic range of >130 dB, so transmission measurements on DUTs with extremely high stopband attenuation can be performed with high accuracy, even at low input levels.

Power calibration: testing active DUTs

Power calibration performed in the factory enables constant output power and high accuracy in the measurement of absolute input level over the full frequency range. This is particularly important for frequency-converting measurements and non-linear measurements on active components. Furthermore, frequency-dependent level variations of an external test setup can be measured and compensated with the aid of the Power Calibration option.

Simultaneous display of four traces on the 26 cm colour LCD

The ZVx models are the first network analyzers in this price class to simultaneously display up to four measurement traces with independent parameters (measured quantity, frequency range, bandwidth, etc). The large, active colour LCD with high refresh rate allows precise alignments without operator fatigue.

Internal PC

The network analyzers are equipped with a PC board including interfaces for keyboard, mouse, printer, external monitor and WindowsNT as the operating system. In the PC mode, the internal hard disk can be accessed and PC programs executed on the ZVR. This function considerably simplifies operation, processing and result recording. The optional Ethernet link, the integration of any printer driver and the execution of IEC/IEEE bus control programs on ZVR considerably extend the application range and performance. Complete setups, traces, numerical results, limit lines, calibration data, macros and screenshots can be stored on the hard disk or on floppy disks. The available formats (e.g. WMF, ASCII, Serenade....) allow problem-free import to Windows programs. The data can be processed in the ZVR with the aid of the internal PC.




Automatic test systems

Fast recording and processing of measured data and, in addition, an SCPI-conformal IEC/IEEE bus command set make all models of the ZVR family ideal for use in automatic measurement systems. All models are equipped with two IEC/IEEE bus interfaces as standard. One is used for analyzer control via an external PC, the other for controlling external devices, e.g. ** sources for intermodulation or mixer measurements, from the ZVR. Another optional IEC/IEEE bus interface is provided for the internal PC. Via this interface, IEC/IEEE control programs can be executed on the internal PC, thus enabling the ZVR to control itself or complete test systems. The Ethernet option allows data exchange and control via LAN.

Efficient calibration techniques

The classic 12-term calibration method requires four calibration standards: Through, Open, Short and Match. The name TOSM given to this method is an abbreviation of the standards' names. A number of other modern calibration methods (TOM, TRM, TRL, TNA) are also provided in ZVR and ZVC. Unlike TOSM (12-term) they require only three different standards. Additionally, lines (L), reflecting one-ports with unknown reflection coefficient (R), matched attenuators (A) and two-port networks (N) with symmetrical reflection can be used. Due to its simplicity, TOM is the method recommended for general applications. For calibration at frequencies up to 100 MHz it is not even necessary to connect an open circuit, and the ports may simply be left open. Thus a complete two-port calibration can be performed with only two calibration standards. TOM allows also implicit verification so that errors caused by defective calibration kits or operating errors are excluded. This considerably enhances reliability in the laboratory and particularly in production.

With on-wafer measurements, measurements on PCBs or in fixtures it is difficult to design or specify suitable calibration standards at justifiable effort. This problem can be solved with the TNA and TRM calibration methods developed and patented by Rohde& Schwarz. With these methods the characteristics of the calibration standards need not be fully known. With TNA, for instance, a full two-port calibration can be performed with two standards: if reflection symmetry is provided at the reference planes, the calibration step with network (N) does not require a standard to be connected, the test ports can just be let open. Just a through (T) with known length and a matched attenuator (A) are required.

The calibration effort is reduced to a minimum when the AutoKal option is used that requires only one simple through-connection.














Options for ZVRE, ZVR, ZVCE, ZVC

Automatic Calibration AutoKal R&S?ZVR-B1 
Time Domain R&S?ZVR-B2 
Mixer Measurements R&S?ZVR-B4 
Nonlinear Measurements R&S?ZVR-B5 
Reference Channel Ports R&S?ZVR-B6 
Power Calibration R&S?ZVR-B7 
Ethernet Adapter, RJ-45 Connector R&S?FSE-B16 
Second IEC/IEEE Bus Card R&S?FSE-B17 1066.4017.02 
3-Port Adapter
** ZVC, ZVCE up to 4 GHz R&S?ZVR-B8 
Virtual Embedding Networks
* only for ZVR,ZVC R&S?ZVR-K9 
Increased Output Power for Port1 or Output a 1 R&S?ZVR-B10 
4-Port Adapter
** ZVC, ZVCE up to 4 GHz R&S?ZVR-B14 
Generator Step Attenuator PORT1 R&S?ZVR-B21 
Generator Step Attenuator PORT2
* only for ZVR, ZVC R&S?ZVR-B22 
Receiver Step Attenuator PORT1 R&S?ZVR-B23 
Receiver Step Attenuator PORT2 R&S?ZVR-B24 
External Measurements R&S?ZVR-B25 
Service Kit R&S?ZVR-Z1 

    深圳市同心圓電子有限公司坐落于中國電子產業基地——深圳，是一家集儀器儀表銷售、租賃、維修、維保、計量校準、測試方案、軟硬件升級以及回收為一體的專業服務公司。

    擁有通暢的采購渠道、專業的技術服務團隊、快捷的售后服務體系、優秀的管理隊伍、及擁有國內外數百家**光電子企業、科研所、**機構和高等院校等單位長期合作關系和服務經驗；與國內外多家品牌儀器制造商和*計量檢測機構建立長期戰略合作伙伴關系；給廣大企業提供完備的儀器儀表配套服務。同心圓秉承“誠信經營，服務用戶”的理念，在客戶節約投資成本和降低投資風險的同時，讓測試儀器得到充分利用，為社會設計更多的**。

    堅持與合作伙伴攜手共贏是我們企業發展的目標；同心圓愿與各界朋友攜手并進、共同發展、同心圓夢！

經營品牌：美國惠普/安捷倫/是德（HP/Agilent/Keysight）、美國泰克（Tektronix）、美國力科（leCroy）、美國艾法斯（Aeroflex）、美國吉時利（Keithley）、美國福祿克（Fluke）、美國國家儀器（NI）、德國羅德與施瓦茨（R&S）、日本安立(Anritsu)、日本愛德萬（Advantest）、日本橫河（yokogawa）、日本*（*）、日本菊水（KIKUSUI）英國馬可尼（IFR）、加拿大Exfo等世界**品牌。

經營設備：網絡分析儀、頻譜分析儀、信號源、信號發生器、綜合測試儀（包括無線和手機等綜合測試儀）、數字通訊測試儀、示波器、調制度儀、電聲測試儀、音頻分析儀、邏輯分析儀、阻抗分析儀、信號分析儀、電源、頻率計、功率計、音視頻分析儀、EMI接收機、萬用表、電子與負載、眼圖儀（光示波器）、光譜分析儀、誤碼分析儀、光時域反射儀(OTDR)、可調激光源、光功率計、光探頭、光衰減器、光纖熔接機、光波長計、光回?fù)p儀和光開關等射頻通訊與光通訊測試儀器儀表。