產品名稱：材料交流電壓下擊穿耐壓的測試設備/絕緣材料的介電強度儀器
Product Name: voltage breakdown tester
產品型號：ZJC-50KV、ZJC-100KV
Product model: ZJC-50KV, ZJC-100KV
產品品牌：智德創新
Product brand: Innovation of wisdom and morality
控制方式：計算機控制
Control mode: computer control
符合標準：GB/T1408、ASTM D149等
Meet the standards: GB/T1408, ASTM, D149 and so on
適用材料：橡膠、塑料、薄膜、陶瓷、玻璃、漆膜、樹脂、電線電纜、絕緣油等絕緣材料
Applicable materials: rubber, plastic, film, ceramic, glass, paint film, resin, wire, cable, insulating oil and other insulation materials
測試項目：擊穿電壓測試、介電強度測試、電氣強度測試、耐電壓擊穿強度測試等
Test items: breakdown voltage test, dielectric strength test, electrical strength test, withstanding voltage breakdown strength test, etc.
試驗電壓：20KV、50KV、100KV、150KV等
Test voltage: 20KV, 50KV, 100KV, 150KV and so on
電壓精度：≤1%
Voltage accuracy: less than 1%
適用材料：絕緣材料
Applicable material: insulating material
升壓速率：10V/S-5KV/S
Step up rate: 10V/S-5KV/S
試驗方式：交流/直流、耐壓、擊穿、梯度升壓
Test mode: AC / DC, voltage resistance, breakdown, gradient boost
控制系統：PLC控制升壓
Control system: PLC control, step up
核心部件：采用進口配件
Core components: imported parts
試驗介質：絕緣油、空氣
Test medium: insulating oil, air
顯示方式：曲線顯示、數據打印
Display mode: curve display, data printing
其它特點：無線藍牙控制
Other features: Wireless Bluetooth control
設備組成：主機、計算機、電極
Equipment: mainframe, computer, electrode
電極規格：25mm、75mm、6mm
Electrode specifications: 25mm, 75mm, 6mm
電器容量：5KVA、10KVA
Electrical capacity: 5KVA, 10KVA
耐壓時間：0-8H
Compression time: 0-8H
安全保護：九級安全保護
Safety protection: nine level safety protection
質保日期：三年、終身維護。
Warranty date: three years, life-long maintenance.
培訓方式：工程師上門培訓安裝
Training methods: engineers, on-site training, installation
出據證書：514所、304所、科學研究院等單位均可
Certificate of release: 514, 304, scientific research institutes and other units are available
主機尺寸：700*800*1300mm、1900*1300*1700mm
Host size: 700*800*1300mm, 1900*1300*1700mm
主機重量：100KG、200KG
Host weight: 100KG, 200KG
產品類別：電性能檢測儀器
Electric performance testing instrument
物流包裝：德邦、木箱
Packing: wooden box, Debon Logistics
付款方式：全款發貨
Payment: all goods shipped
產品貨期：1-3個工作日
Product delivery: 1-3 working days
一、用途：
I. use:
ZJC-100KV電壓擊穿試驗儀又稱擊穿電壓測試儀、介電強度測試儀、擊穿強度測試儀、電氣強度測試儀、耐電壓強度測試儀、介電擊穿強度測試儀、固體絕緣材料電氣強度試驗機、耐壓儀、工頻電壓擊穿試驗儀。由電腦控制，數據采集方式通過光電隔離，有效解決試驗過程中的抗干擾問題，軟件操作使用方便，能夠實時顯示動態曲線，同時升壓速率無級可調，可以根據自己的需要進行升壓速率調節，調節范圍在0.1KV-3KV/S，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據?？蓪崟r繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。并且能夠自動判別試樣擊穿并采集擊穿電壓數據及泄露電流，同時能夠在擊穿的瞬間電壓迅速降低自動歸零。軟件系統操作方便，性能穩定，安全可靠。
ZJC-100KV voltage breakdown tester also called breakdown voltage tester, dielectric strength tester, breakdown strength tester, electrical strength tester, dielectric strength tester, dielectric breakdown strength tester, solid insulation tester, dielectric strength tester, voltage breakdown testing instrument. By computer control, data acquisition by means of photoelectric isolation, effectively solve the interference problem in the test process, the software has the advantages of convenient operation, can display the dynamic curve, while the pressure rate can be adjusted, can according to their own needs to boost rate adjustment, adjusted in the range of 0.1KV-3KV/S, so that the pressure rate truly uniform and accurate. And can accurately measure the leakage current data. It can draw the test curve in real time, display the test data, judge accurately, and save, analyze and print the test data. And it can automatically judge the sample breakdown and collect the breakdown voltage data and leakage current, meanwhile, the instantaneous voltage can be reduced rapidly and the auto zero will be achieved at the instant of breakdown. Software system is easy to operate, stable performance, safe and reliable.
二、符合標準：
Two, meet the standards:
1、GB1408.1-2006《絕緣材料電氣強度試驗方法》
1, GB1408.1-2006 "insulation material electrical strength test method"
2、GB1408.2-2006《絕緣材料電氣強度試驗方法?
2, "GB1408.2-2006 electrical strength of insulating materials test methods
? ? ? ? *2部分：對應用直流電壓試驗的附加要求》
Part second: Additional requirements for tests using direct voltage "
3、GB/T1695-2005《硫化橡膠工頻擊穿電壓強度和耐電壓的測定方法》
3, GB/T1695-2005 "vulcanized rubber power frequency breakdown voltage, strength and voltage determination method"
4、ASTM D149《固體電絕緣材料工業電源頻率下的介電擊穿電壓和介電強度的試驗方法》
4, ASTM, D149 - Test methods for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials at mains frequencies
三、主要技術要求：
Three, the main technical requirements:
1、設備輸入電壓：交流 100KV (普通試驗室電源均可兼容)
1 、 equipment input voltage: AC 100KV (common laboratory power supply can be compatible)
2、試驗電壓方式：交流 0--100 KV ；直流 0--100 KV；
2 、 test voltage mode: AC 0--100 KV; DC 0--100 KV;
3、電器容量：10KVA;
3, electrical capacity: 10KVA;
4、試驗方法：0-100KV全量程可調;
4, test method: 0-100KV, adjustable range;
5、擊穿及耐壓試驗升壓速率：10V/S-5KV/S
5 breakdown and withstand voltage test step-up rate: 10V/S-5KV/S
6、試驗方式：?交/直流試驗：1、勻速升壓 ?2、階梯升壓 ?3、耐壓試驗
6, test mode: AC / DC test: 1, 2, speed boost step-up voltage 3, pressure test
7、過電流保護裝置應有足夠靈敏度以**試樣擊穿時在0.1S內切斷電源。
7, over-current protection device should be sufficient sensitivity to ensure that the sample breakdown, cut off the power supply in 0.1S.
8、漏電電流選擇：1—100 mA可由計算機軟件自由進行設定。
8 、 leakage current selection: 1 - 100 mA can be set free by computer software.
9、本儀器采用**的無觸點原件勻速調壓方式，淘汰同類產品中機械傳動升壓方式。
9 、 this instrument adopts advanced contactless original uniform pressure regulation mode, and eliminates the mechanical drive step up mode in similar products.
10、支持短時間內短路試驗要求。(其它同類產品無此功能)
10. Support short circuit test in short time. (other similar products do not have this function)
11、一次試驗可以同時做5個試樣。(同類產品一次試驗只能做一個試樣)
11, a test can be done at the same time 5 samples. (similar products can only be one test at a time)
12、電壓測量誤差：≤ 2％
12, voltage measurement error is less than 2%.
13、試驗電壓連續可調：0-100 KV
13 、 test voltage can be adjusted continuously: 0-100 KV
14、耐壓時間設定： 0-6小時(可通過軟件連續設定)
14 、 voltage setting time: 0-6 hours (can be set continuously by software)
15、九級安全防護措施：?
15, nine security measures:
(1) **壓保護
(1) over voltage protection
(2)試驗過流保護?
(2) test overcurrent protection
(3)試驗短路保護
(3) test short circuit protection;
(4)安全門開啟保護
(4) safety door opening protection;
(5)軟件誤操作保護
(5) software misoperation protection;
(6)零電壓復位保護
(6) zero voltage reset protection
(7)試驗結束放電保護
(7) test discharge protection;
(8)獨立保護接地
(8) independent protective earthing;
(9)試驗完成后電磁放電
(9) electromagnetic discharge after test completion
四、試驗方式：
Four, test methods:
1、絕緣試樣空氣中擊穿或耐壓試驗
1. Breakdown or withstand test of air in insulating sample
2、絕緣試樣浸油中擊穿或耐壓試驗
2, insulation breakdown or compressive specimen immersed in test
3、絕緣試樣空氣中階梯擊穿或耐壓試驗
3 step breakdown or withstand voltage test in air sample of insulating sample
4、絕緣試樣浸油中階梯擊穿或耐壓試驗
The 4 step, the insulation breakdown or compressive specimen immersed in test
五、試驗軟件：
Five 、 test software:
1、在試驗過程中可對升壓擊穿過程繪制實時曲線，每次試驗的升壓曲線都由不同顏色構成，試驗結束后可疊加對比材料的試驗數據重復性。
1. In the test process, the real-time curve can be drawn to boost the breakdown process, and the boost curve of each test is composed of different colors. At the end of the test, the test data repeatability of the contrast material can be superposed.
2、可以隨時調取當前及歷史試驗數據進行查看，編輯及修改參數。
2, you can always transfer the current and historical test data to view, edit and modify parameters.
3、試驗過程中可以隨時修改試驗條件及存儲路徑及自動存儲試驗結果。
3. The test conditions, storage paths and automatic storage test results can be modified at any time during the test.
4、試驗過程中，可隨時通過軟件決定本次試驗是否有效，方便篩選試驗結果。
4, the test process can be determined at any time through the software test, the test is effective, easy to screen test results.
5、可設置操作口令，做到專機專人操作，避免無關人員誤操作。
5, you can set the operation password, to do special plane operation, to avoid irrelevant personnel misoperation.
六、安全保護功能：
Six 、 safety protection function:
1、試驗在試驗箱中進行，試驗箱門打開時電源加不到高壓變壓器輸入端，即高壓側無電壓。100KV測試設備高壓電極距離試驗箱壁的較近距離大于270mm，50KV測試設備高壓電極距離試驗箱壁的較近距離大于250mm，試驗
1. The test is carried out in the test chamber. When the test case door is opened, the power supply can not be added to the input terminal of the high voltage transformer, namely the high voltage side has no voltage. 100KV test equipment, high voltage electrode distance test box wall nearest distance is greater than 270mm, 50KV test equipment high-voltage electrode distance test box wall nearest distance is greater than 250mm, test

北京智德創新儀器設備有限公司成立于2001年（以下簡稱智德儀器，ZDYQ）注冊資金6000萬，是集研發、設計、生產、銷售、服務、管理于一體的高科技企業。擁有一支專業從事研發、制造、安裝、調試及售后服務的團隊，聯合北京清華大學、北京工業大學、北京大學，北京航天航空大學精密儀器*作為公司的技術顧問，另外我們還擁有一批素質高、熱情高、服務優的銷售及售后服務團隊，這就解除了您的后顧之憂。
     北京智德創新儀器設備有限公司位于美麗繁華的政治經濟文化交流中心北京市，物華天寶，人杰地靈。公司在發展過程中，主要致力于電性能檢測儀器，燃燒性能檢測儀器，橡膠塑料專用儀器，建材檢測儀器，試驗機，制樣機，密度計等儀器設備的研發與制造，積極采用**的設計理念，依據國家標準、**標準、德標準準、日本標準、美標準準，研發出較加精密、精準的儀器。公司自創建以來，一直保持著健康穩定的發展態勢，并以**過30%的年均增長速度快速持續發展，完善的客戶服務體系，確保了智德創新產品的設計**，質量穩定，供貨及時和服務周到。?  
  展望未來，智德創新儀器正在以打造基業長青**企業的發展目標為指導，全面提升內部管控，按照專業化、規模化、品牌化、資本化的發展策略，持續良好。以“開拓創新、精益求精、服務真誠、客戶至上”為理念，致力于與國內外**企業集團強強合作，以共創中國精密儀器行業的美好明天而不斷努力。