LDPE絲印油墨,絲印LDPE油墨銷售廠家!!!
PP, PE絲印油墨
【承印物】:適用于免處理PE、HDPE、LDPE,聚丙烯材料,包含處理和未處理的OPP, BOPP, PP類片材
【產品舉例】:各類文具、各類包裝瓶罐(洗發水、化妝品包裝)、蓄電池等。
【產品特性】:耐酒精,汽油,平光,附著力強,抗劃傷性能好中等干速,耐水煮,熱油,抗白電油。
【配套溶劑】:S-4稀釋劑
【干操條件】:自干24小時或70℃烘烤30分鐘
注憊事項:
1、使用該產品進行印刷時,因PP, PE材質的表面張力較大,請先作好測試后再進行印刷。對于PE材料,有可能產生附著力不佳的現象,這時可以加入2%-5%的PP附著力促進劑進行印刷測試,視其效果。
2、對于表面張力較小的材料,可先用PP處理水或火焰處理法對底材進行處理后印刷,這樣可以提高油墨的附著力。
3、該油墨屬于慢反應固化型油墨,測試附著力必需在印刷后24小時以上再進行測試。LDPE screen printing ink, silk printing LDPE ink manufacturer!!!!
PP, PE screen printing ink
PE, HDPE, LDPE, polypropylene material, including treatment and untreated OPP, BOPP, PP sheet
[example]: all kinds of stationery products, all kinds of bottles (shampoo, cosmetic packaging), battery etc..
[product characteristics]: alcohol, gasoline, light, strong adhesion, good anti scratch performance medium dry speed, water boiling, hot oil, anti white oil.
[supporting solvent]: S-4 diluent
Drying conditions: bake for 30 minutes at 24 hours or 70 degrees centigrade
The note exhausted matters:
1, the use of this product for printing, because of PP, PE material surface tension is larger, please first do a good test and then print. For the PE material, it is possible to produce poor adhesion, then 2%-5% PP adhesion promoter can be added to the printing test to see its effect.
2, for materials with smaller surface tension, the PP can be treated with water or flame treatment to print the substrate before printing, so that the adhesion of the ink can be increased.
3. The ink belongs to the slow reaction curing ink. The test adhesion must be tested more than 24 hours after the printing.