山型橡膠止水帶是采用國家標準GB18173.2-2000標準組織生產的,尺寸公差一律按國家標準執行,如用戶有特殊要求,可按用戶要求制造。橡膠止水帶和止水橡皮系以天然橡膠與各種合成橡膠為主要原料,摻加各種助劑及填充料,經塑煉、混煉、壓制成型,其品種規格較多,有橋型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等.根據使用情況又可分類為埋式橡膠止水帶和背貼式橡膠止水帶。該止水材料具有良好的彈性,耐磨性、耐老化性和抗撕裂性能,適應變形能力強、防水性能好,溫度使用范圍為-45℃-+60℃.當溫度**過70℃,以及山型橡膠止水帶受強烈的氧化作用或受油類等有機溶劑侵蝕時,均不得使用山型橡膠止水帶。
山型橡膠止水帶廣泛應用于施工縫、變形縫橋梁伸縮縫的施工,具有可檢測、可注漿修補特點的止水帶;該產品可適用于所有地下防水、排水結構的工程建設中,如擋水壩、蓄水池、地鐵隧道、地下室等。
Widely used in construction joints, deformation joint construction of bridge joint hill type rubber sealing strip, with detection and repair features with sealing grouting; the product can be applied to all underground waterproof and drainage structure in engineering construction, such as dams, reservoirs, subway tunnels, underground etc..
山型橡膠止水帶保存運輸注意事項:
Precautions for the preservation and transportation of the mountain rubber sealing belt:
山型橡膠止水帶在運輸與貯存時不能長時間露天曝曬,防止雨淋,勿與污染性強的化學物質接觸,防止機械,鋼筋損傷。產品應存放場所較好保持-10℃-+30℃,相對濕度在40%-80%應注意勿使其損壞,放置于通風、干燥處、并應避免陽光直射,禁止與酸堿油類等接觸,且隔離熱源,應保存于室內,并不得重壓,成品應取直平放,勿加重壓。存放場所較好保持-10+30,相對濕度40%80%。自生產日期起半年內產品性能應符合國家標準的規定。
Mountain type rubber water stop can not be exposed for long time in transportation and storage, so as to prevent rain. Do not contact with chemical substances with strong pollution and prevent mechanical and steel damage. The product should be stored to keep the best places for -10 DEG C to +30 DEG C, relative humidity between 40% and 80% should pay attention not to damage and placed in a dry and ventilated place, and should avoid direct sunlight, no contact with the acid oil, and isolating heat, should be kept in the room, and no weight of finished products should be straight flat do not add weight. The best storage place is -10+30, and the relative humidity is 40%80%. The performance of the product within six months from the date of production shall be in accordance with the regulations of the state standard.