普林柯 PRINCO：射頻導納物位控制器
L2000-220AVC-L843
L2000-220VAC/L843/150MM-450MM
L2000-220VAC/L843W/300-23.5M
Description
The 42JS VisiSight family of sensors offers a full range of sensing
modes in miniature rectangular housing. Visible light source is offered
in all models for ease of alignment. Additional transmitted beam
infrared status-indicator source models are offered for excellent
crosstalk immunity.
The 42JS VisiSight family provides an indication if the sensor operation
is unstable. An indicator flashes if the ** level is too close to the
detection threshold. This indicator helps in easy alignment of the sensor
and forewarns against detection of a background.
Features
 Visible light source that is offered on all models for ease of
alignment
 Optional snap-on adapter for 18 mm mounting
 Patented ASIC design offers linear sensitivity adjustment,
stability indication, and excellent noise immunity
 Compact sealed housing and cavity-free design to minimize
collection of dust and debris while allowing for easy sensor
cleanup
 Threaded metal M12 or M8 connector on pigtail
 360° visible status indicators
 Additional transmitted beam models available with Infrared
light source for excellent cross talk immunity
 Input to disable light source on transmitted beam emitter
1. Verify that the sensitivity knob is set at its maximum (factory
default) setting.
2. Pan the sensor to the left, right, up, and down to center the beam on
the sensed object (for diffuse), reflector (for retroreflective), or
transmitter (for transmitted beam). Affix the sensor position when
the green status indicator is ON (not flashing) and the yellow
output indicator is ON (light sensed and L.O. output energized).
This configuration assures a good margin and that the **
received is greater than twice the ** that is required to energize
the L.O. output.
3.
a. For diffuse applications, remove the object being sensed and
observe the green status indicator. If the green indicator is
flashing (at 6 Hz), the sensor is receiving more than half the
** required to energize the L.O. output when there can be
minimal or no received **. It indicates that the sensor is
getting close to detection of the background. Stability can be
optimized by reducing the reflectivity of the background or
reducing the sensitivity. Reduce the sensitivity to shorten the
sensing range. If sensitivity is reduced, check that both the green
and yellow indicators are on when the object is detected (step 2).
In applications where the full range is needed, for example,
sensitivity cannot be reduced, the green indicator can be left
flashing.
b. For retroreflective and transmitted beam applications, place the
object to be sensed in the beam path and observe the green
indicator. If the green indicator is flashing (at 6?Hz), that sensor
is receiving more than half the ** required to energize the
L.O. output when there can be minimal or no ** received. It
indicates that the object being detected is letting some light go
through (semi-transparent or too small). Adjust sensitivity and
repeat step 2.
Crosstalk Avoidance
For applications of transmitted-beam sensors which require adjacent
pairs to be mounted close, use the red indicator and infrared indicator
pairs as adjacent pairs.
The following spacing (center to center) between the adjacent pairs can
be maintained to avoid crosstalk:
1. Red indicator pair that is adjacent to the infrared indicator pair:
a. 60 mm (2.4 in.) for sensing range up to 1.6 m (4.8 ft)
b. 20 mm (0.8 in.) for sensing range greater than 1.6 m (4.8 ft)
2. Two adjacent pairs of red indicator models or two adjacent pairs of
infrared indicators: 360 mm (14 in.)

  陜西賽碩機電設備有限公司坐落在古城西安是一家專門從事工業自動化產品的代理、經銷、系統開發及技術服務的高科技企業。公司本著“質量是我們的生命公司，服務是我們的追求”這一理念，不斷沖擊市場的挑戰，在自動化領域**了豐碩的成果。我公司主營：羅克韋爾AB、西門子全系列、PRINCO、 ABB、YTC自動控制設備，高低壓電器，傳動液壓電磁閥，計算機設備，自動化系統DCS系統、PLC控制系統、進口伺服控制系統、中小型變頻器、開關按鈕、電機數控產品等！在大型工業中應用比較廣泛，涉及領域有汽車、化纖與紡織、食品和飲料、基礎設施、船舶、采礦、冶金和水泥業、石油和天然氣等~以多年經銷Allen-Bradley成套產和數控產品著稱。自公司成立以來，我們一直貫徹“誠信立足，服務致遠”的經營理念，在工業自動化控制領域內,我們以追求**的市場服務意識和良好的企業信譽為廣大客戶提供了品種齊全的產品和專業的技術服務并贏得了充分的認可。
   本公司現擁有豐富的品種、充足的庫存、健全的網絡、完善的物流、快捷的服務、眾多優勢。我們蓄勢待發，我們蓬勃發展 ，我們力爭為廣大客戶打造一個全新的中國較大的工控采購平臺。 
 竭誠歡迎海內外客戶來電、來函洽談業務或技術交流，讓我們攜手共同發展！