HW(160T/190T/230T)拖車式液壓鉆機
Trailer Mounted hydraulic drilling rig



1、鉆機采用自動伸縮式鉆塔，用兩支高強度油缸作支撐，一組液壓閥控制鉆塔俯仰，操作省時省力，***，較大限度的為用戶創造效益。
2、輪式拖車，重量較輕，能降低車輛行走機構的噪音，減小車體震動可大幅度降低油耗，可在城市道路行走。
3、底盤自帶絲杠支腿，可用于鉆機調平，可改裝液壓高支腿，工作時可作為輔助支撐。
4、采用24v電啟動柴油機，降低操作者的勞動強度，特別是寒冷季節，柴油機啟動困難時，更顯現了較大地優越性。
5、本機配套Bw-160泥漿泵，泵流量、壓力大，維修保養方便，零配件全國各地方便購買。
1,The drilling rig adopts automatic telescopic drilling tower, be supported with two high strength oil cylinder. One set of hydraulic valve controls drilling tower’s pitching. When you operate, it is saving time, safe and reliable, the maximum to create benefits for the user.
2, wheels trailer is lighter and can reduce the noise of the vehicle running mechanism, reduce car
body vibration and fuel consumption. It can drive in the city road.
3, The chassis comes with its own screw leg to level drilling rig. It can be modified hydraulic high leg for auxiliary support.
4, By using 24 v electric starting diesel engine to reduce labors’ intensity of operators especially in winter. When diesel engine start difficulty, it show significantly more advantages.
5, The machine is matched with Bw - 160 mud pump with high flow rate,high pressure, easy to maintenance. And spare parts is convenient to buy all over the country.




拖車鉆機主要技術參數
Trailer Mounted hydraulic drilling rig’s specification
整機參數
(Machine parameter)	型號(Model)	HW-160T	HW-190T	HW-230T
	鉆孔深度 Drilling depth(m)	160	190	230
	開孔直徑 Open hole dia. (mm)土、巖石	500、220	500、220	500、273
	終孔直徑 End hole dia. (mm)	75	75	75
	鉆桿直徑 Drill rod dia. (mm)	42、50	42、50	42、50、60
	鉆孔傾角 drill angle (° )	90-75	90-75	90-75
	配套動力 Matching power (kW)	13.2	13.2	15
	重量 Weight without power (kg)	3350	3400	3600
	鉆機尺寸長*寬*高
Dimension L*W*H (m)	3.8*1.95*2. 7	3. 8*1. 95*2. 7	3.8*1. 95*2. 7
立軸（Spindle)	立軸轉速Speed (r/min)	142/285/570	130/300/480/730/830/1045	64/128/287/557
	立軸行程Stroke (mm)	450	450	450
行走底盤(Walking chassis)	爬坡角度 Climbing angle (° )	 20°	 
20°	 20°
	行走速度 Moving speed (km/h)	30	30	30
	絲杠支腿有效高度(mm)
hydraulic landing leg valid height	300	300	300
鉆塔(Drill tower)	額定負荷 Rated load (ton)	18	18	18
	有效高度Height (m)	6.5	6.5	6.5
泥漿泵(Mud pump)	流量 Flow(L/min)	160	160	160
				
	較大壓力 Max. pressure (MPa)	1.3	1.3	1.3
	往復次數back and forth times/min	165	165	165
				
	吸水管直徑 Inlet hose dia. (mm)	51	51	51
	出水管直徑 Outlet hose dia. (mm)	32	32	32
				
以上參數如有改動，恕不另行通知?（Any change of the parameters mentioned above can be made without prior notification.)

濟寧恒旺工礦機械有限公司位于孔孟之鄉、運河之都的魅力城市濟寧，東臨“東方圣城”曲阜，西臨歷史悠久的京杭大運河，南臨”“齊魯靈秀”微山湖， 北臨”五岳之尊”泰山。公司成立于2002年，注冊資金101萬，現有員工100余人，根據市場需要**經營鑿巖機，巖石電鉆，噴漿機，支護設備，刮板機配件，軌道器材等礦用設備及配件。公司秉承“為客戶提供便利服務，為員工創造發展機會”的經營理念及“進取不懈，成功盡享”的企業精神。熱忱歡迎國內外各界新老朋友前來洽談貿易，共創大業，共鑄輝煌。