CV系列
A20500                                             Download Sales Sheet

  
 
 	ACE? Light Source
Standard Features
1.   Solid state dimmer for continuous control zero to full intensity.
2.    Heavy duty, grounded metal housing.
3.   115 or 230 input voltage versions available.
4.   IR interference filter for cool illumination.
5.   Full illumination on .60" active diameter input
6.  Interchangeable Modulamp? Units offer 2 positions to maximize individual lamp efficiencies.
7.   Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination.
	 
		 
 
A20560                                             
 
Standard Features
1.    Heavy duty, grounded metal housing.
2.   115 or 230 input voltage versions available.
3.   IR interference filter for cool illumination.
4.   Full illumination on .60” active diameter input.
5.    Solid state dimmer control.
6.   Interchangeable Modulamp? Units offer 2 positions to maximize individual  lamp efficiencies.
7.    Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense, uniform illumination.
8.     Built-in thermal shut down.
	 
		 

 
A20800                                              Download Sales Sheet

 
DCR? III Light Source
  DC regulated light source provides intense, cool illumination.
Standard Features
1.  DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage
variation.
2.  Universal input voltage – accepts 90 to 265 VAC.
3.  Current limiting – protects the unit from over heating due to defective and
aging bulbs.
4.  Transient protection – allows remote location of bulb.
5.  Lamp change indicator light – LED located on front panel changes from
green to red when lamp should be replaced. This is due to either an open or partially shorted filament.
6.   Soft start “l(fā)amp saver” circuitry.
7.   IR interference filter for cool illumination.
8.   Solid state dimmer control for continuous dimming.
9.    Interchangeable Modulamp? Units offer 2 lamp positions to maximize individual lamp efficiencies.
10.  Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense, uniform illumination.
11.  Can power the RS232 from the 9-pin connector.	 
		 
 
A20870                                            Download Sales Sheet

 
Standard Features
1.   DC-regulated light source limits light fluctuation to ± 0.5% due to line voltage
variation.
2.  Universal input voltage – accepts 90 to 265 VAC.
3.  Current limiting – protects the unit from over heating due to defective and  aging bulbs.
4.   Transient protection – allows remote location of bulb.
5.   Lamp change indicator light – LED located on front panel changes from  green to red when lamp should be replaced. This is due to either an open or partially shorted filament.
6.   Soft start “l(fā)amp saver” circuitry.
7.   IR interference filter for cool illumination.
8.   Solid state dimmer control for continuous dimming.
9.   Interchangeable Modulamp? Units offer 2 lamp positions to maximize  individual lamp efficiencies.
	 
		 
 
A20890                                               Download Sales Sheet
	DCR? IV Light Source
  DC regulated light source with integrated Equalizer? light feedback to provide
stabilized light output for the most demanding machine vision inspection  applications. (See DCR? III Plus datasheet for base description.)
Benefits
1.  Stable lamp output over the life of the lamp and minimized lamp to lamp variation.
2.  Remote controllable using integrated RS232 interface.
Standard Features
1.   Flexible - Two configurations available:
A.   DCR? IV used with a reference Modulamp? unit and off-the-shelf fiber
optics, maintains DDL lamp output a
±2% over the life of the lamp and  ±8% lamp to lamp.
B.  For even greater control, use the DCR? IV with fiber optic products that  have an integrated reference bundle; special order only. This will maintain DDL lamp output and lamp to lamp variation within ±1%.
2.   All of the features of the DCR? III Plus Light Source including control of up to three additional DCR? III light sources via an expansion cable.
3.   LED’s located on the front panel indicate that the lamp intensity is stabilized.
4.   Easy to use front panel controls for calibration and intensity control.
5.  CSA certified to UL, CE compliant to low voltage and EMC directives.
6.  Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz.	 
		 
 
A20900                              
 
 
Standard Features
1.    Color temperature of 6000K.
2.    Twice the light output of DDL lamps.
3.    Bulb lifetime of 3500 hours average at 50W output.
4.     Metal halide lamp specifically designed    with highest uniformity.
5.     Solid state dimmer control.
6.     Heavy duty, grounded metal housing.
7.     Universal input voltage - accepts 90 to 265 VAC.
8.    IR interference filter for cool illumination.
9.    Full illumination on .50” active diameter input.
17.  Detachable IEC cord.
18.  CSA approved to UL spec, CE compliant.	 
		 
 

 

上海錫明視覺科技有限公司

   上海錫明科技由數個擁有**的*海外華人共同出資創辦，作為一家**從事圖形圖像研究、開發和銷售的工控公司，在機器視覺、圖像檢測領域里，我公司的**技術人員已經有了近十年的實際項目操作經驗，和國內其他視覺公司相比這一點是我們的優勢。我公司與來自美國COGNEX，德國CARL ZEISS,美國FOSTEC/SCHOTT,德國MYCRONA,日本TAMRON,新加坡VZ TECH，ISLAND OPTICAL，日本CBC，CCS等的視覺*們，及國內中科院，上海交通大學，南京大學，無錫江南大學等科研機構的視覺*人士及行業*們進行親密協作，相互探討，共同開發，著力向用戶推介**較新、較具競爭力的、高性價比的視覺技術產品，包括視覺配件CCD器件、相機、鏡頭、光源、圖像采集處理卡、圖像分析軟件等產品，并協助用戶設計較佳的系統解決方案。我們成功地與美國COGNEX，美國FOSTEC/SHOTT，德國CARL ZEISS,日本TAMRON達成代理協議，成為其在中國區/華東區（一）*的代理商和系統集成商，同時*代理鏡頭COMPUTAR, NAVITAR, COSMICAR/PENTAX；相機SONY, TELI, WATEC, JAI/PULNIX；光源CCS, MORITEX, STOCKYALE, AI；板卡及圖像處理軟件IN-SIGHT VISION PRO, IMP等，為國內廣大用戶提供較**的智能機器視覺系統，并提供免費咨詢，**項目評估，提供從項目設計、軟硬件開發、制作調試到整機集成的一條龍服務和24小時的技術熱線服務,硬件3個月**包換，軟硬件1年**維修，是全國較有實力的機器視覺系統集成商之一。真誠希望我們的付出能為您的工作帶來方便與快捷。

業務往來：諸多**大公司都與我們有密切的商務往來，如INTEL英特爾，GE通用電氣,GM通用汽車,SONY索尼、SIEMENS西門子、FOXCONN鴻海富士康，ROBORT BOSH博世、中芯**，AMD等等。

應用領域：我們在電腦、手機、家電配件、汽配、精密工件加工、印刷、自動灌裝、包裝、醫療、藥品、冶金制具、接插件、硬碟、電子、半導體、晶圓、分立元件、集成塊、IC電路、線路板、航空導航、通訊、定位、自動安裝、條形碼、二維碼、光學字符檢測、產品檢驗、缺陷檢測、表面質量檢驗等非接觸式測量領域我們有*到的經驗和技術。同時我們經銷各類自動控制產品,從PLC、觸摸屏、變頻器、步進、伺服系統到DCS集散控制系統,并承接各類工業自動化控制項目。 如有需求，隨時歡迎來電咨詢和洽談。我公司被美國COGNEX公司評為COGNEX大中國區域銷售*一。