3014LED貼片 白色 3014貼片LED 白光 3014燈珠發光管 背光源專
注意事項(Note)
(1)防靜電措施ESD countermeasure
靜電及高壓會對LED 造成損壞,特別是晶片材質為InGaN 的產品對靜電防護要求更加嚴格,要求在使用和檢驗產品時戴防靜電手腕帶或防靜電手
套,焊接工具及設備外殼要**的接地,焊接條件遵循此份規格書中的條件。Static electricity and high volt can damage led,The productio
n whose Die manterial is InGaN must strictly requiried to precentESD,Must put on static glove andstatic fillet, Soldering tool and the cover of device must connect the ground,soldering conditionfollows the related stating of production specification manual.
(2)過電流保護Protecting countermeasure when over current為了避免由于電壓的變化引起的大電流沖擊而造成產品損壞,需要加
入保護電阻。
In order to avoid the voltage change of large current shockand damaged products, need to join protect resistance.
(3)LED 安裝方法LED installation method
1、在應用中**將大功率安裝在適當?shù)纳崞?,在散熱片和大功率之間打上散熱膏(安裝之前****散熱器表面光滑平整,大功率**
和散熱片能夠的接觸)
In applications must be installed in proper high-power fin, on the radiator and high heat paste (between playing before th
e installation must ensure radiator surfacesmooth smooth, high-po
wer ** and fin can contact。
2、注意在拿、放和安裝、使用大功率時,不能給大功率的芯片區施加任何壓力,防止大功率里面的金線開路。
Attention, and in the installation and use of high-power, cannot give power chip area pressures, prevent the power of gold in open.
(4)存儲時間Storage time
1、在溫度在5℃-35℃,濕度RH60%條件下,產品可保存一年。**過保存期的產品要重新檢測后方能使用。
In temperature in 5 ° c - 35 ° c, humidity RH60 % conditions, product can save a year. Shelf life than to the product can be used after testing.
2、如果打開的產品在5℃-35℃,RH60%的空氣條件下放置**過一周,則需要將產品在65℃正負5℃的環境中放置24 小時以上,并盡量在15 天內
使用。
If open products in 5 ° c - 35 degrees Celsius, RH60 % of air condition place more than a week, need to be in 65 ° produ
cts in the environment of plus or minus 5 ° c over 24 hour, andtry to use in 15 days.
(5)清洗Cleaning
當用化學用品清洗膠體時要特別的小心,因?yàn)橛行┗瘜W(xué)品對膠體的表面有損傷并引起褪色如三氯乙烯、丙酮等??捎靡掖疾潦脮r(shí)間不能**過3 分鐘。
When using chemicals cleaning gel to care, because some of the colloid surface chemical and cause damage to fade as inside tri
chloroethylene, acetone, etc. Time can\"t exceed available ethanolwipe for 3 minutes.
(6)對分光產品,請按分包使用,避免出現色差和燈暗。
For spectral products, please click the subcontractor, to avoid the use of color and lights.
(7)產品點測時要注意,LED 不能單獨點亮,光源后面一定要有足夠面積的散熱板,若空燈點亮**過3 秒鐘光源就會損壞。
Products: LED to notice, when measured separately, illuminant light can behind must have enough heat plate, if the area more
than 3 seconds empty light source can be damaged.
東莞市元潤電子科技有限公司是**研發、生產及銷售各系列LED的高新科技企業,座落于有“小中國香港”
之稱的東莞市樟木頭鎮。LED系列產品正廣泛應用于汽車燈、路燈、景觀照明以及其他室內外照明。公司匯
集了產品設計、生產制造、企業管理、市場營銷的**高級人才,產出各項系數良好、質量較優的LED,且
每一款產品都是在精心的制作和嚴格的監測下完成。企業在“**、務實、誠信、求進、共贏”的文化**下,
公司全體成員積極向上,嚴格奉行“品質*一,系統管理,交貨快捷,客戶滿意”為宗旨,竭誠為廣大新老客戶
服務!我們以“務實”“敬業”“**”為宗旨,你們產品的需求就是我們的產品質量!愿我們一同成長,一起進步。與您攜手發展!
** 元潤 型號 S3014-WC 尺寸規格 3014 功率 0.06(W) 顯色指數 70-80 光通量 10-12(lm) 正向電壓 5(V) 反向電壓 5(V) 靜電擊穿電壓(ESD) 6(V) 額定電流 20(A) 芯片** 晶元 芯片尺寸 10(mil) 熒光粉** 元潤 膠水** 元潤 導線材質 銅線 支架材質 銅 發光角度 8(°) 發光效率 90(lm/W) 色容差 5(SDCM) 熱阻 ≤5(°/W) 較大允許結溫 1(°) 1000小時常規老化 90(%) 是否通過LM-80測試 是 相關色溫 2700(K) ESD(人體模式) 500 工作電流 45 工作電壓 1.8-2.2