Features
integrated sensor electronics including signal conditioner
temperature compensated, normalized 4...20mA output signal
2-wire connection - sensor power obtained from current loop
linear output characteristics
high measurement accuracy
minimal linearity deviation
high long-term stability
hysteresis free output signal
no interference by ambient electromagnetic fields
shock proof as without moving mechanical parts
hermetically sealed
sensor electrically isolated from point of measurement - no ground connection
zero point adjustable through 360° using clamping ring
loop current limitation
EMC certified
Description
The NG2I, NG3I and NG4I are capacitive and liquid based inclinometers with integrated sensor electronics and current amplifier. Electronic temperature compensation makes up for the temperature drift of the sensitivity of the primary transformer. An integrated, highly stable voltage regulator ensures stable operation for a range of supply voltages.
The measurement technique provides a linear relationship between the angle to be measured (up to 80 degrees for the NG4I) and the output signal that is calibrated during manufacture. The measuring time constant can be matched to the requirements of the measurement task by appropriate hardware programming.
The power is obtained from the measurement current loop, thereby eliminating the need for a separate power supply and enabling operation with two wire connection.
Application
The NG2I, NG3I and NG4I are suitable for applications requiring high measurement accuracy with high linearity and temperature stability as well as high long-term stability for measurement of large inclination angles and for which the power is to be supplied via a 4...20mA current loop without the need for a separate supply voltage.
We recommend the sensor box SB1I with an integrated NG - inclinometer and a 4...20mA output signal for operation in especially harsh operating conditions.
These inclinometers are typically used in construction, mining, vehicles, aircraft, ships, transportation and conveyor systems and process control as well as for safety engineering.
Technical Specifications
TypeNG2ING3ING4IMeasuring range±10 degrees±30 degrees±80 degreesResolution<0.001degrees <0.003degrees <0.01degrees Standardized sensitivity (other standardizations on request) 0.8mA/degree0.266mA/degree0.1mA/degreeLinearity deviation<1·10-3F.S.Transverse sensitivity<0.5% at 45° tiltSettling timeapprox. 0.3 seconds (1s, 2s or 3s optional)Temperature drift of sensitivityapprox. ±0.01% / KTemperature drift of zero pointapprox. ±10-3 degrees / KTerminal voltage10V ... 30V either polarity!Output current offset for sensor zero position12mADegree of protectionIP65 Operating temperature-40°C ... +85°CLagertemperatur-45°C ... +90°CWeight (without clamping ring or cable)approx. 110 gramsStandard electrical connection0.5m cable Ø4.6 mm, 2-wires
different cable lengths optionalSummary of standard SEIKA products
 
  Static Accelerometers (lower cut-off frequency = 0 Hz)
 
Model Measuring rangeResolutionB1, B2, B3±3g, ±10g, ±50g ( 1g = 9.81ms-2 )<0.001g, <0.005g, <0.01g  
Dynamic Accelerometers (lower cut-off frequency = 1 or 10 Hz)
 
ModelMeasuring rangeResolutionFrequenzy rangeBDK3± 3 g < 10-3 g 1...300 HzBDK10± 10 g < 5*10-3 g 1... 800 HzBDK100± 100 g < 1*10-2 g 1... 1.5 kHz 
Inclinometers
 
ModelMeasuring rangeResolutionNB3±10° (±20°) <0.001°NA2-05, NA2-10NA3-30
NA4-45, NA4-70
±5°, ±10°±30°
±45°, ±70° 
<0.001Grad, <0.002Grad<0.005Grad
<0.01Grad, <0.01Grad
N2, N3, N4±10°, ±30°, ±70° <0.001°, <0.005°, <0.005° NG2, NG3, NG4±10°, ±30°, ±80° <0.001°, <0.005°, <0.005° NG...IInclinometer type NG2, NG3, NG4 with integrated 4...20mA signal conditioner NG...U Inclinometer type NG2, NG3, NG4 with integrated 0...5V signal conditioner NG360 Inclinometer with 360° measuring range and integrated microprocessor and RS485 interface  
Sensor boxes (for harsh operating conditions)
 
Model FeaturesSB1ISensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 4...20mA output.SB2ISensor box (98 x 64 x 56mm3) with two integrated SEIKA sensors of type B, BD, BDK, N or NB and two integrated signal conditioners with a 4...20mA output each. Both channels are electrically isolated from each other.SB1USensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 0...5V output.SB1SSensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of any type, one integrated signal conditioner with 0...5V output and two open collector switch outputs that respond to traversing of adjustable thresholds.SBS1USensor box (98 x 64 x 56mm3) with one integrated SEIKA-Servo-Inclinometer for measuring small angles of up to 2 degrees with very high resolution and an integrated signal conditioner with 0...5V output.SB360Sensor box (98 x 64 x 56mm3) with one integrated SEIKA sensor of type NG360, internal microprocessor and RS485 interface.SBG2USensor box (124 x 80 x 58mm3) with two integrated SEIKA sensors of type NG and two 0...5V outputs.SBG3ISensor box (124 x 80 x 58mm3) with three integrated SEIKA sensors and three integrated signal conditioners with 4...20mA output.SBL1Sensor box (180 x 180 x 100mm3 - large and robust) with one integrated SEIKA sensor of any type and one integrated signal conditioner with 4...20mA output.SBL1SSensor box (180 x 180 x 100mm3 - large and robust) with two integrated SEIKA sensors of any type, one integrated signal conditioner with 4...20mA output, one integrated signal conditioner with 0...5V output and two safety relays that respond to traversing of adjustable thresholds. The SBL1S has two redundant, electrically isolated measuring channels for safety related applications.XB..Extra robust, pressure-, saltwater- and corrosion-proof stainless steel sensor box (ø120 x 50) as an alternative to the SB.. housings (180 x 180 x 100mm3) for especially harsh operating conditions, aggressive fluids and saltwater.SC485BBox (63.5 x 58 x 35mm3) with RS485/RS232 converter for operation of inclinometers NG360, SB360, and XB360 from a RS232 port. 
Sensor accessories
 
ModelFeaturesNV4aFiltering signal conditioner for sensor signal matching with symmetrical +/- 4 V voltage outputNV6aFiltering signal conditioner for sensor signal matching to a 4...20mA, 2-wire interfaceNV8aFiltering signal conditioner for sensor signal matching with an asymmetric 0...5V output voltageSW3Sensor cube for multiaxial arrangement of SEIKA accelerometers and/or SEIKA inclinometersSBBS, SBBB, SBBWFixing plates from stainless steel for sensor boxes SB..
靈敏度 : 0.8mA/degree, 0.266mA/degree, 0.1mA/degree ;
線性度 : 0.1（%F.S.） ;
防護等級 : IP65 ;
輸出信號 : 模擬型 ;
制作工藝 : 集成 ;
種類 : 角度 ;
型號 : NG2I, NG3I, NG4I ;
品牌 : SEIKA ;
加工定制 : 否 ;

萊逸電氣 萊逸電氣成立于二零一二年，專注從事歐美日工業產品（主要是測量儀器）的代理與銷售、測量數據擷取分析系統的整合與集成，扮演著科技接口 (Technology Interface) 的角色，引進高科技測試儀器與設備，以應用為導向，提供系統整合與技術顧問服務，應用于航天、汽機車、鐵路、電力、電子、機械、土木及國防等各個領域，服務于全國產學研各界。 儀器代理 引進歐美日各國（如荷蘭Penko，瑞士Kistler、Remag，美國Honeywell、Measurement Specialties、Futek、PCB、Macro Sensors、AST、Hi-tech、Memsic Inc.、 Silicon Desing Inc,、SpaceAge Control、 Interface、AERO，德國imc、MMF、Lorenz Messtechnik、Sartorius、Schenck、HBM、Seika , 英國Mantracourt、RDP、Penny+Giles、Rocoil、Data Track、Thies Clima，日本 Silicon Sensing Systems Japan Ltd、TML、NTS，意大利AEP，西班牙Utilcell及法國OROS等）各式高性能測試儀器。從微小的傳感器到攜帶型儀器，大型實驗設備及各種專業用分析軟件，完整的產品線，提供全方位的整體服務。 系統整合 我們并不滿足于單純的儀器代理，系統整合 (from sensors ... to report) 一直是我們的主要目標，特別是多頻道動態數據擷取分析系統的整合與設計。我們有擷取各式訊號的前端傳感器、記錄訊號的記錄器、分析訊號的分析儀或后續軟件、為各式系統所量身訂作的測試用軟件，更重要的是--我們有個學有專精且不懼挑戰的工作團隊。