TF CARD CONNECTOR, PUSH TYPE  TF卡座
1.0 SCOPE
This specification covers performance, tests, and qiality requirements for SD PUSHCONNECTOR SMTTYPE
2.0 REQUIREMENTS
2.1 Materials And Finish
Insulator:;LCP And PA46,rates UL94V-0
Contacl: （A）Material:Phosphor Bronze,T=0.20mm       
(B) Finish:Selective Gold(lu”/3u”/5u”/10u”/15u”)Plated on Contact Area,Plated Tin/Lead 100u”on solder Area
Card Detect& Write Protect:
(A) Material:Phosphor Bronze,T=0.15mm
(B) Finish:Selective Gold(lu”/3u”/5u”/10u”/15u”)Plated on Contact Area,Plated Tin/Lead 100u”on solder Area
       Shell:SUS304-3/4H,t=0.20mm.
2.2 Characteristics
   Voltage Rating:250V AC 
   Current Rating:0.**mps Max
   Contact Resistance(**):40m Ω Initial(100 m Ω After Test)Maximum
   Insulatric:Withstanding Voltage: 100 m Ωmaximum.500VDC.
   Dieltric:  Withstanding Voltage:500VAC/Minute.
   Opetating Temperature:-20℃~+60℃
   Storage Temperature: -40℃~+70℃.
   Mating Cycle:1000 Insertions.
   Contact retention in housing:0.3kg/Pin Min.
2.3 Electrical
2.3.1 Rated Current
     Requirement:0.**MP(AC/DC)
     Test Condition:Mate connectors measure by dry circuit.
2.3.2 Rated voltage
     Requirement:250VAC
     Test Condition:Mate connectors measure by dry circuit.
2.3.3 Insulation Resistance
     Requirement:1000MΩ Minimum.
     Test Condition:Mate cinnectors,apply 500V DC between adiacent terminal and ground.
2.3.4 Contact Resistance
     Requirement: 40mΩ Minimum.100mΩ Maximum at and off life.
     Test Condition:Mate connectors measure by measure by dry circuit.20mm V max,10mA  
2.3.5 Dielecctric Strength
     Requirement:500VAC/Minute
2.4 Mechanical
2.4.1 Insertion Force(max)
     Requirement:40N MAX.(4.0kgf)
     Test Condition:Insert connector at the apeed rate of 25±3mm/min.
2.4.2 Extraction Force(min)
     Requirement:2N(0.2kgf)
     Test Condition:Ratention connector at the apeed rate of 25±3mm/min.
2.4.3 Contact Retention(min)
     Requirement:3N(0.2kgf)
     Test Condition:Apply axial pull out force at 25±3mm/min on the assembly in the housing.
2.4.4 Durability Cycling(min)
     Requirement:10000Cycies
     Test Condition:400~600 cycles operations using a mate connector at therate of 400~600 cycles
     Within I hours.
2.5 Solder abililty
2.5.1 Solder ability
      Requirement:95%min
      Test Condition:①Solder time:3±0.5sec
                  ②Solder temperature:230±5℃
2.5.2 Resistance to Soldering Heat 
       Requirement:NO damage
       Test Condition:①Immerse test sample into molten solder(260±5℃)to 1.2 mm from 
       The datum line. The dwell time shell be5±5sec.
           ②After 30 sec interval. Immerse the sample into solder(260±5℃)for3±5sec.
2.6 Environmental/Reliabillty
2.6.1 Repeated Insertion/Extraction
     Requirement:Contact resistance △20mΩ change.
     Test Condition:When mated up to 5000cycles reoeatedly by the rate of 400~600cycie.
     Per hour.
2.6.2 Temperature Load  
      Requirement:30℃ Max
      Test Condition:Carry rated current load.
2.6.3 Heat Rasistance
      equirement:Apperance No damage Contact Resistance △20mΩ change.
      Test Condition:85±3℃,96hours.
2.6.4 Cold Resistance
      Requirement:Apperance No danage Contact Resistance △20mΩ change.
      Test Condition: -40℃±3℃,96hours.
2.6.5 Temperature: 
Requirement:Apperance No danage Contact Resistance △20mΩ change.
Test Condition:5cycies 1)-40℃ 30min;2)+85℃ 30 min
2.6.2 Salt Spray
Requirement:Apperance No danage Contact Resistance △20mΩ change.
Test Condition:48±4hr exposure to a salt spray from the 5±1% solution at 35±2℃

針數 : 11 ;
芯數 : 11 ;
絕緣體材質 : LCP ;
接觸件材質 : cu ;
特性 : 阻火/阻燃 ;
加工定制 : 否 ;
制作工藝 : 注塑 ;
線長 : 1（mm） ;
形狀 : 矩形 ;
讀卡類型 : TF ;
支持卡數 : 單卡 ;
接口類型 : TF ;
應用范圍 : 電腦 ;
工作頻率 : 高頻 ;
種類 : 卡座 ;
型號 : TF-09 ;
** : 振銳 ;

-樂清市振銳電子有限公司-   **從事各類開關等產品的研究、開發、生產及銷售。
   樂清市振銳電子有限公司，位于名勝風景區雁蕩山南麓的沿海重鎮----虹橋鎮。工廠緊靠104國道，距溫州機場僅50公里，地理位置優越，交通較其便利！是開發、設計、生產各類輕觸開關、搖頭開關、AV同芯插座、電源開關、微動開關、KB型拔動開關、CK型插口、DC型直流電源開關等系列產品的**生產廠家，產品廣泛應用于電腦周邊、家電儀器、視聽設備、通訊設備和汽車等領域。
工廠擁有完整的ISO9001**質量**體系，研究與**是我們持續成長的動力，強大的模具研發與制造能力使我們不斷推出新產品；良好的生產管理與不斷的制程改善，使我們提供了**的產品，并使其較具價格競爭力，公司總經理薛志強與振銳人始終尊奉“以質量求生存，以科技**求發展”的企業宗旨，立足國內，放眼世界，開拓進取。
堅定的腳步，奠定了事業的基礎，我們堅信，不懈的努力和孜孜的追求，定將使華強在**里成長為參天大樹，去接受世紀風雨的挑戰和洗禮。全體振銳人熱烈歡迎國內外客戶朋友光臨洽談合作！ 
加工方式 : 來樣加工;來圖加工;
工藝 : 插件加工;電子焊接加工;電子組裝加工;SMT貼片加工;
**名稱 : 振銳
質量控制 : 內部