板式滅菌機
一、產品概述：
板式殺菌機組是采用新型高效BR、BP型板片為換熱主機，物料和過熱蒸汽（或過熱水）在機器內的非接觸性熱交換，使流體物料在較短時間在同一機組內達到要求的殺菌溫度、保溫、熱回收與冷卻等工藝要求，具有結構緊湊、性能穩定、易于清洗、傳熱效果好、效率高、能耗低，是乳品、豆奶、果汁飲料、糖漿、醬油、酒類、醋類、藥液等液態物料的理想滅菌設備。
二、工作原理：
    殺菌機利用高精度可控溫度的熱水或蒸汽對物料進行加熱殺菌，物料由前工序進入平衡罐，經進料泵輸入到換熱器內，在預熱部分與殺過菌的熱物料進行換熱后使冷物料溫度升到預定值，然后通過由熱水或蒸汽非接觸間接加熱到工藝所需的溫度，并在保溫管中維持所要求的一段時間，從保溫管進入預熱段機內與冷物料交換進行熱回收，最后進入冷卻段冷卻到工藝所需的溫度出料，冷卻段可分為冷卻水冷卻與冰水冷卻，整個過程均在封閉狀態下進行，以**物料不受二次污染的生物穩定性目的。整套機組可根據用戶的不同要求對物料加熱、保溫、殺菌冷卻的不同工藝要求進行特定的組合系統設計，以滿足各類工藝要求。
三、設備組成及特點：
殺菌機組主要由板式換熱主機、物料平衡罐及物料管路、熱水罐及熱水（蒸汽）管路、物料泵、熱水泵、清洗泵、控制柜及電器元件等組成。
1. 物料和加熱介質均在各自的密封系統中通過非接觸性熱交換實現加熱，確保物料衛生安全；
2. 殺菌時間短，可確保物料的營養成份不被破壞；
3. 整機全部采用食品級不銹鋼材料，確保達到國家對飲料食品設備安全衛生指標要求；
4. 傳熱效果好，熱回收率高，耗能少；
5. 主要控制元件、閥件及配套件均選用進口件，使用壽命長；
6. 采用PLC控制，可對物料各段的加熱溫度、熱水溫度、蒸汽流量調節等實行自動控制，并設有物料自動回流系統，確保物料**達到滅菌效果；
7. 結構簡單，易于清洗，操作方便，維修費用低。


四、設備基本參數：
名稱	 
GLBS-3	GLBS-5	GLBS-10	GLBS-15	GLBS-20
生產能力	t/h	3	5	10	15	20
進料溫度	℃	5	5	5	5	5
出料溫度	℃	25	25	25	25	25
殺菌溫度	℃	95-137	95-137	95-137	95-137	95-137
保溫時間	S	30-6	30-6	30-6	30-6	30-6
冰水耗量	multiple	1	1.7	3.3	5	6.7
電能耗量	kw	7	10	12	15	18
外形尺寸	mm	2200*1700*1950	2200*1700*1950	2500*1900*2150	2800*2000*2250	2800*2000*2250





















Plate Type Sterilizer
I. Product Introduction
Plate type sterilizer adopt modern engineering widely used are high efficient BR,BP plate heat exchanger,it will heat the fluid to required sterilization temperature in a short time through non-touch heat exchange by liquid to steam or hot water.It is the ideal sterilization equipment for fluid beverage such as milk,fruit juice,vegetable juice etc.
Plate sterilizer is for fluid beverage food aseptic hot treatment,product enter into the heat exchanger from balance tank because of high precision water temperature difference,cold product will reach set index value after heat exchange between heating part and sterilized material, and then reach 120℃ indirectly by the water heated by  steam, material will have high temperature sterilization in the pipeline for keeping the required temperature in a short time,the material will heat exchange with coming cold material after discharge out from the insulation pipeline, finally cooling to the required discharge temperature at cooling stage, this whole processing is running under seal, make sure material operation stable.
It is available for processing system designed with different process based on user’s requirement on the heating,insulation,sterilization,cooling stage.
This equipment consist of material balance and transfer system,plate type heat exchange system,material pipeline system,hot water pipeline system,steam pipeline system,hot water heating system,material automatic back flow system,temperature auto control and electric control system etc.

II.Equipment Characteristic 
1.Material and heating medium having non-touch heat exchange under completely seal system, make sure it is sanitary and safety.
2.Short for sterilization,ensure nutrition ingredient without broken.
3.Whole machine adopt food level stainless steel material,ensure it reach native beverage food equipment safety sanitary index requirement.
4.Good heat exchange,hot recycle efficiency is high,low consumption
5.Main control element,valves and spare part are imported, longer life time.
6.Adopt PLC control for each heating temperature,how water temperature,steam flow rate control etc, and equipped with material auto back flow system, make sure material is ** sterilization well.
7.Easy construction,easy to clean,operation convenient,low cost maintain.






Project 	Model	GLBS-3	GLBS-5	GLBS-10	GLBS-15	GLBS-20
Capacity 	t/h	3	5	10	15	20
Feeding Tem.	℃	5	5	5	5	5
Discharge Tem.	℃	25	25	25	25	25
Bactericidal Tem.	℃	95-137	95-137	95-137	95-137	95-137
holding time	S	30-6	30-6	30-6	30-6	30-6
Ice water consumption	multiple	1	1.7	3.3	5	6.7
Power 	kw	7	10	12	15	18
Size 	mm	2200*1700*1950	2200*1700*1950	2500*1900*2150	2800*2000*2250	2800*2000*2250

格翎（上海）環境科技有限公司位于上海市奉賢區柘林經濟園區，是專業于食品、醫藥、生物機械設備研發設計、加工制造、工程安裝一體化的**企業。公司技術力量雄厚，加工設備精良，檢測手段齊全，通過了ISO9000認證、歐盟CE認證、北美FCC認證，形成了從產品研發、加工制造、質量監控的健全管理體系。隨著食品、醫藥、生物技術的快速發展，各種新技術、新工藝應運而生，全行業對*、節能、減排的意識達成了高度共識。格翎公司協同美國GL-Innovations集團公司在上海企福（金匯）科技園設立的研發中心，針對**產業發展趨勢與新興市場的需求，實現了生物、化工、醫藥、食品等領域的技術創新與成套生產線的優化組合，使客戶的整廠設計與設備布局較為科學合理，減少投資、提**，系列成套工藝設備