公司簡介：
濟寧天通水處理設備有限公司位于山東省濟寧市。是國內的水處理設備集研發、生產制造及銷售于一體的生產廠家，其核心產品以：廢水處理站、廢水處理工藝、廢水處理設備、工業廢水處理設備、水處理設備、生活廢水處理設備、環境廢水處理設備等設備為主。公司坐落在古老文明的孔孟之鄉，風景秀麗的微山湖畔——山東濟寧。緊靠貫穿南北的京九鐵路、京滬鐵路、京福高速、京杭大運河。有著“運河之都”的美譽。得天*厚的地理位置為廣大的客戶帶來了交通運輸的便利條件。有朋自遠方來不亦樂乎！本公司將以儒商風范，誠信負責之置業精神，熱忱歡迎各方客人光臨參觀指導，以求共同發展。
氣浮機在污水處理設備中發揮重要的作用
氣浮機
溶氣氣浮機主要用于固—液或液—液分離。通過溶氣和釋放系統在水中產生大量的微細氣泡，使其粘附于廢水中密度與水接近的固體或液體微粒上，造成整體密度小于水的狀態，并依靠浮力使其上升至水面，從而達到固—液或液—液分離的目的。
   采用新型高效的溶氣設備——微氣泡發生器，代替傳統的引氣設備向水中溶氣，并在氣浮區域內安裝若干斜管組，包括箱體、刮渣機、螺旋出料機共同組成一個完整氣浮凈水裝置。理論上講，氣浮的處理效果與停留時間是沒有直接聯系的，而只與氣浮面積有關，如果將水深H的氣浮區減少為水深H/10，那么氣浮距離和停留時間都將縮小10倍，這就是著名的“淺池理論”。氣浮區加入斜管的目的是增大氣浮面積，大大降低了雷諾系數，使氣浮避免在紊流狀態下進行，制造良好的層流狀態，達到淺層氣浮的效果。
同理，當懸浮物的密度大于1時，由于安裝了斜管組，就會產生淺池沉淀的效果，從而使沉淀在紊流條件下進行。粒徑教大、比重教大的不易上浮的污染物質就會集中到集泥區里，達到凈水的目的。
按水流方式可分為：平流式容氣氣浮機、**式容氣氣浮機和綜合式溶氣氣浮機。
Company introduction:
Jining Tian Tong water treatment equipment Co., Ltd. is located in Jining, Shandong province. Is a manufacturer of water treatment equipment manufacturing and R & D, sales in one of the domestic, its core products: wastewater treatment plant, wastewater treatment, wastewater treatment facilities, industrial wastewater treatment equipment, water treatment equipment, waste water treatment equipment, water treatment equipment, environmental equipment. The company is located in the ancient civilization of the hometown of Kong Meng, the beautiful scenery of the Weishan Lake - Jining, Shandong. It is closely related to the Beijing - Kowloon Railway, Beijing - Shanghai railway, Beijing - Fuzhou Expressway, Beijing - Hangzhou the Grande Canale, which runs through the north and the south. It has the reputation of "the capital of the canal". The unique *graphical location for the vast number of customers brought the convenience of transportation. It's fun to have friends coming from afar! The company will be responsible for the integrity of the Confucian style, their spirit, warmly welcome all guests to visit the guide, to seek common development.
Air floatation machine plays an important role in *age treatment equipment
Air floatation machine
The gas floatation machine is mainly used for the separation of solid - liquid or liquid - liquid. The dissolved gas and release system to produce large quantities of fine bubbles in the water, make its adhesion to solid or liquid particles density close to water in the waste water, resulting in the overall density is less than water, and rely on the buoyancy causes it to rise to the surface, so as to achieve solid-liquid or liquid-liquid separation purposes.
A new efficient air dissolving device, the micro bubble generator, is used to replace the traditional air entraining equipment to dissolve the gas into the water, and a number of inclined pipe groups are installed in the air floating area, including the box, slag scraper and screw discharging machine, which form a complete air flotation water purification device. In theory, the treatment effect of flotation and the residence time is not directly linked, and only related to air area, if the water depth of H flotation zone to reduce the depth of H/10, then the air distance and residence time will be reduced 10 times, this is the famous "shallow tank theory". The purpose of adding the inclined pipe in air flotation area is to increase the area of air floatation and greatly reduce the Reynolds coefficient, so that air floatation is avoided in turbulent state, and good laminar flow is achieved to achieve the effect of shallow air floatation.
In the same way, when the density of the suspended matter is more than 1, the effect of the shallow pool precipitation will be produced because of the installation of the inclined tube group, which makes the precipitation under turbulence. The non - floating contaminants with large size and specific gravity will be concentrated in the mud gathering area to achieve the purpose of water purification.
According to the flow mode, it can be divided into a flat current type air bearing air floatation machine, an upflow type air flotation machine and a comprehensive gas floatation machine.

濟寧 天通，是國內良好的機械設備加工生產研發廠家，其**技術以：智能自動化小型壓路機、數控鋼筋籠滾焊機、公路拌合機機械設備為主。

濟寧 天通，始終堅持以“先做人，后做事”為****觀，以“儒商文化”為品牌文化，以“做今日品牌，創**企業”為宗旨，以“實用為本、德行天下”為理念，鑄造中國機械行業的**品牌。公司依托與國外的分支機構、國內的辦事處、及專業的施工隊伍，憑借行業內設備研發*團隊的強大創新能力、扎實的設備品質、完善的售后服務體系，贏得了**客戶的信任與合作。

濟寧 天通，一如既往的目標是：較好的產品、較好的服務、較好的信譽。目前，濟寧天通已在中鐵、中交及各省路橋等諸多施工單位工地**輝煌成績，完成眾多大型的標準化施工配套服務，并且產品已**至南美洲、東南亞、西亞、歐洲等地區。盡管天通**一定的成績，但是我們相信，
沒有較好，只有較好，所以天通努力的腳步會一直奔跑在路上！孔子曰：三人行，必有我師焉。擇其善者而從之，其不善者而改之。所以，我們堅持不懈的結合工地實踐情況及廣大用戶提出的寶貴建議，持續完善產品、服務，努力成為廣大工程施工單位較可信賴的長期合作伙伴。